spawn/notesAll game guides
Motocross pit notes

Motocross The Game steering settings

Steering has four sliders: gain, sensitivity, linearity and dead zone. Two complete setups have been published so far, and they sit at opposite ends. This page gives both, what their authors say about them, and the developers' method for tuning.

Checked 19 November 2026.

Developer reference

Shown in the official controls video, credited to the rider Stone Rider

Steering gain
5
Sensitivity
0
Linearity
0
Dead zone
0

The video calls these “reference settings, not numbers everybody must copy”. Quick steering with nothing filtered out.

Kelso, 70 hours

Player with top-5 and top-10 times on the 250F leaderboards before launch

Steering gain
+1
Sensitivity
−4
Linearity
0
Dead zone
5

Much calmer. He found gain 3 to 5 “way too sensitive” and gain 0 or −1 too slow to turn the bike.

Source: MTG Explained: Controls and Controller Setup (official Motocross The Game YouTube channel, 16 Nov 2026); My BEST Settings After 70 HOURS in Motocross The Game! (player video by Kelso, 14 Nov 2026).

What players report when they move the sliders

ChangeWhat happenedWho
Gain 3, 4 or 5“Way too sensitive” for him; easy to lose the bike when carrying speed through a cornerKelso
Gain 0 or −1“I can barely get the bike to turn”Kelso
Gain +1, sensitivity −4His settled setup after 70 hours; he may try gain +2Kelso
Sensitivity −3 or −2Suggested as alternatives to try around his −4Kelso
Gain 5, everything else 0The developers' reference rider's setupOfficial video

Kelso's wider point is that the game rewards being smooth on the sticks, and that aggressive steering inputs are the easiest way to lose the bike mid-corner. He also advises settling on a setup and giving yourself time on it instead of changing it every session.

Source: My BEST Settings After 70 HOURS in Motocross The Game! (player video by Kelso, 14 Nov 2026); MTG Explained: Controls and Controller Setup (official Motocross The Game YouTube channel, 16 Nov 2026).

How the developers say to tune it

  1. Check neutral. Let go of the stick and confirm the steering returns to centre. If the bike drifts, raise the dead zone a step.
  2. Small inputs first, then larger ones. Watch how the bike responds to each.
  3. Change one setting at a time. In the video's words, a setup that feels exciting in one corner may be less useful than one you can place accurately every lap.
  4. Use a short section, three passes. First pass for the bike controls, second to watch the rider's movement, third to combine them. Keep the speed low enough to see what changed.

Source: MTG Explained: Controls and Controller Setup (official Motocross The Game YouTube channel, 16 Nov 2026).

What the four sliders mean

The game does not publish definitions, so take these as the usual meaning of the terms on a controller, not as tested MTG behaviour.

GainHow much steering you get for a given stick movement. Higher turns more for the same push.
SensitivityHow quickly the steering reaches the angle you asked for. Kelso runs it negative to slow the steering down.
LinearityThe shape of the response curve between the centre and the edge of the stick. Both published setups leave it at 0.
Dead zoneThe area around the stick's centre that is ignored. It hides stick drift, at the cost of very small corrections.

Steering is half of turning

The left stick steers; the right stick moves the rider's hips forward, back, left and right, and the rider's weight acts on the bike. The official video warns against learning only the steering and throttle. If the bike will not hold a line no matter what the sliders say, look at the right stick and at whether you are sitting or standing before changing gain again.

The full layout is on the controls page.

Source: MTG Explained: Controls and Controller Setup (official Motocross The Game YouTube channel, 16 Nov 2026).

Short answers

What are the best steering settings for Motocross The Game?

Start from one of two published setups. Developer reference: gain 5, sensitivity 0, linearity 0, dead zone 0. Kelso (top-5 on 250F leaderboards): gain +1, sensitivity -4, linearity 0, dead zone 5.

Should I raise steering gain to turn sharper?

Kelso tried gain 3, 4 and 5 and found the bike too sensitive, and tried 0 and -1 and could barely turn. He settled on +1. The developers' reference rider uses 5, so both ends are rideable; it depends on how smooth your thumb is.

What dead zone should I use?

The developer reference uses 0 and Kelso uses 5. Whatever you choose, the official video says to check that steering returns to neutral when you let go of the stick.

Spotted something wrong or out of date on this page? Tell us and we fix it the same day.

More guides from Spawn Notes:HUNGERHere Comes the HordeCasualties: UnknownTransformers: Eternal WarAll guides